Chapter 3 Volume Management
3.15 Export Cache Parameters
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
319
3.15 Export Cache Parameters
This function downloads the setting information of the cache parameters for all the volumes at the same
time.
The procedure to export cache parameters is as follows:
1 Click [Export Cache Parameters] in [Action].
2 Click the [Export] button.
Exporting of the cache parameters is executed.
After the cache parameters are exported, a dialog box to download the file appears.
• "Cache Page Capacity", "Prefetch Limit (PL)", "Force Prefetch Mode (FP)", "Multi Writeback Count (MWC)",
"Prefetch Sequential Detect Count (PSDC)", "Sequential Dirty Detect Count (SDDC)", "Sequential Slope
(SS)", "Sequential Dirty Slope (SDS)", "Sequential Parallel Multi I/O Count (SPMC)", and "Extreme Cache
Pool" can be downloaded as cache parameters.
• Cache parameters can be downloaded from "Standard", "WSV", "TPV", "FTV", "SDV", and "SDPV" type
volumes. Note that "Cache Page Capacity" cannot be downloaded from "WSV", "TPV", and "FTV" type
volumes. Note that "Extreme Cache Pool" cannot be downloaded from "SDV" and "SDPV" type volumes.
• "MWC" for each TPP can be downloaded.
To Next Page
Loading...
Need help?
General