Appendix A Parameter List
A.5 RAID Group Management
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
903
A.5 RAID Group Management
This section provides information on the parameters of the following actions for RAID group management.
• Create RAID Group
• Rename RAID Group
• Change Controlling CM
• Expand RAID Group
• Modify RAID Group Parameters
• Assign Eco-mode Schedule (RAID Group)
• Set Key Group (RAID Group)
A.5.1 Create RAID Group
For details about this function, refer to "5.1 Create RAID Group" (page 527).
For the factory default settings for this function, refer to "Appendix B Create RAID Group" (page 1004)
.
● New RAID Group
• Name
Description Input a RAID group name that is to be created.
An existing RAID group name cannot be used.
Input condition/
Display contents
• Up to 16 alphanumeric characters and symbols (except "," (comma) and "?")
• Spaces
To Next Page
Loading...
Need help?
General