Chapter 5 RAID Group Management
5.2 Delete RAID Group
ETERNUS Web GUI User’s Guide (Settings)
Copyright 2015 FUJITSU LIMITED P2X0-1270-13ENZ0
535
5.2 Delete RAID Group
This function deletes the registered RAID groups in the ETERNUS DX.
When a RAID group is deleted, the status of the drives that configured the RAID group change to data drives
that are not used by any RAID group.
The procedure to delete a RAID group is as follows:
1 Select the RAID group that is to be deleted (multiple selections can be made) and click
[Delete] in [Action].
A confirmation screen appears.
2 Click the [OK] button.
RAID group deletion starts.
3 Click the [Done] button to return to the [RAID Group] screen.
• The following RAID groups cannot be deleted:
- RAID groups in which volumes are registered
- RAID groups that are registered in TPPs or FTRPs
- RAID groups that are registered as REC Disk Buffers
- RAID groups that are registered as EXCPs
• When deleting a RAID group where volumes are registered, delete the volumes in advance.
• Up to 128 RAID groups can be deleted at once.
To Next Page
Loading...
Need help?
General