FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
103
Chapter 6
Settings for the Advanced Copy Environment
This chapter describes the necessary preparation that must be performed to use the Advanced Copy function
and copy session management. Perform the required settings in the following order.
6.1 Required settings for the Advanced Copy function
(Local Copy and Remote Copy)
6.1.1 Preparation
The items that must be prepared to use the Advanced Copy function are described below.
For descriptions on the following functions (sections), refer to "ETERNUS Web GUI User’s Guide (Settings)" for
details.
Preparation Function name
License registration Register Advanced Copy License
Copy destination volume creation Create Volume
Copy table size setting Modify Copy Table Size
Copy priority setting Modify EC/OPC Priority
Copy parameter setting Modify Copy Parameters
Event notification setting Setup Event Notification
Port mode setting Modify Port Mode
Copy path setting Set Copy Path
REC Buffer setting Modify REC Buffer
REC Disk Buffer setting Create REC Disk Buffer
REC Disk Buffer allocation Assign REC Disk Buffer
REC multiplicity setting Modify REC Multiplicity
To Next Page
Loading...
Need help?
General
