Chapter 2 Startup and Shutdown
2.2 Login
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
21
2.2 Login
Log in to GUI to start the operation. The GUI operation screen appears.
The menu that is displayed depends on the role that is applied for the user account.
The procedure for logging in is as follows:
1 Click the [Option] button in the login screen, and select the language (English or Japanese).
2 Enter the User ID and Password.
The User ID and the Password vary depending on which account is being used to log in.
• User ID
root
• Password
root (Default)
If a login is attempted while 16 users are already logged in to the GUI, an error screen appears. When this
occurs, note the error message and try logging in again after completing the required operation.
Up to 16 users can be logged in concurrently from the GUI (the number of users that are logged from
CLI is not included). 17 or more users cannot be logged in concurrently.
Also note that when another user is already logged in and performing one of the following
operations, a warning message appears and some functions cannot be used. Confirm the current GUI
usage state and start operation.
• When applying controller firmware
• When applying disk firmware
• When performing the RAID group diagnosis
• When performing the disk diagnosis
To Next Page
Loading...
Need help?
General
