Fujitsu ETERNUS DX200 S3 Setup Guide

Chapter 2 Startup and Shutdown
2.3 Logout
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
23
2.3 Logout
Log out from GUI to finish the operation.
The procedure for logging out is as follows:
Procedure
1 Click the [Logout] link on the top right of the screen.
 A confirmation screen appears.
2 Click the [OK] button.
 This completes the logging out process.
The login screen appears.
End of procedure
A logout is performed automatically under the following conditions:
• When a different user executes a forcible logout (*1)
• When the ETERNUS DX is turned off
• When no operation is performed for 60 minutes or longer after logging in
*1: When the user name is the same as a user who is already logged in, the user who was previously logged in is
forcibly logged out.

Fujitsu ETERNUS DX200 S3 Specifications

General

Model	ETERNUS DX200 S3
Category	Storage
Number of Controllers	2
Drive Types Supported	SAS, Nearline SAS
RAID Levels	0, 1, 5, 6
Power Supply	Redundant
Management Software	ETERNUS SF
Host Interfaces	Fibre Channel, iSCSI, SAS
Form Factor	Rack-mounted