Fujitsu ETERNUS DX200 S3 Setup Guide

Chapter 2 Startup and Shutdown
2.4 Exit from GUI
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
24
2.4 Exit from GUI
Exit from GUI.
The procedure to exit is as follows:
Procedure
1 Click the [Close] button for the web browser.
 Exit from GUI.
The login screen does not appear.
End of procedure
Make sure to perform "2.3 Logout" (page 23) operation before exiting GUI.
If exiting GUI without logging out, the login status is not released.

Fujitsu ETERNUS DX200 S3 Specifications

General

Model	ETERNUS DX200 S3
Category	Storage
Number of Controllers	2
Drive Types Supported	SAS, Nearline SAS
RAID Levels	0, 1, 5, 6
Power Supply	Redundant
Management Software	ETERNUS SF
Host Interfaces	Fibre Channel, iSCSI, SAS
Form Factor	Rack-mounted