Chapter 1 Outline
1.5 User Management
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
17
1.5 User Management
Appropriate user management is important to ensure that security is maintained within the system.
The user management function applies roles with multiple policies when user accounts are created to specify
the functions that are allowed for each user.
The following table shows the difference between user roles.
Operation mistakes and maintenance worker hours can be reduced and storage system security can be
improved by placing the authorized functions of system administrators in units of usage and by only giving
the minimum necessary policies to system administrators.
■ Guide of Initial User Accounts for Fujitsu Maintenance Engineers
Fujitsu would like to thank you for purchasing our products.
The following initial user accounts are available at factory default settings:
• root (Admin user role, system administrator privilege)
• f.ce (Maintainer user role, maintenance engineer privilege)
"f.ce" account is prepared for maintenance work of the ETERNUS DX series by our maintenance engineers. If
engineers do not use this user account through the maintenance work, please login to the ETERNUS using
"root" account, and then disable/delete "f.ce" account or change password of it so that our maintenance
engineers cannot use them.
Meanwhile, when "f.ce" account is not available for our maintenance engineers, please login to the ETERNUS
using "Maintainer" user role account first. And then hand it over to our maintenance engineers and let them
use it to do maintenance work. Please note that maintenance work may take long time if "Maintainer" user
role account is not available.
Default role Available functions Default account
Admin "Admin" is a system administrator privilege.
Functions such as status display and configuration
management are available.
root
Maintainer "Maintainer" is a maintenance engineer privilege.
Setting maintenance such as status display, configuration
management, and maintenance functions are available.
f.ce
Monitor "Monitor" is a general user privilege.
Only the status display function is available.
None
Refer to "Appendix User Roles and Policies" in "ETERNUS Web GUI User’s Guide (Settings)" for details about
user roles and policies.
To Next Page
Loading...
Need help?
General
