Fujitsu ETERNUS DX200 S3 Setup Guide

Chapter 1 Outline
1.2 Features
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
13
1.2 Features
The features for GUI are as follows:
● Initial settings by the wizard
The wizard provides instructions for the basic settings that are required to run the ETERNUS DX.
● Status Display
This function displays the storage system installation image.
● Checking the extent of a failure
If a drive failure occurs, host port, LUN group, volume, RAID group, and installation location can be
referenced to determine the extent of the failure.
● Easy operation
If a hardware failure is detected, the system administrator can receive a mail containing detected failure
information.

Fujitsu ETERNUS DX200 S3 Specifications

General

Model	ETERNUS DX200 S3
Category	Storage
Number of Controllers	2
Drive Types Supported	SAS, Nearline SAS
RAID Levels	0, 1, 5, 6
Power Supply	Redundant
Management Software	ETERNUS SF
Host Interfaces	Fibre Channel, iSCSI, SAS
Form Factor	Rack-mounted