Chapter 5 Host Interface Management
5.3 Create CA Port Groups
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
87
5.3 Create CA Port Groups
This function creates a new CA port group, and registers the port to be a member.
This section uses FC port groups as an example to show how to create CA port groups.
An FC port group is a group of FC-CA type ports that are connected to the specified host group. This function
configures the host affinity setting for each FC port group.
• The maximum number of port groups per storage system is 128, irrespective of the CA types.
• The maximum number of ports per port group is 8.
• A port can be a member of several port groups.
The procedure to create an FC port group is as follows:
1 Click [Create FC Port Group] in [Action].
The [Create FA Port Group] screen appears.
To Next Page
Loading...
Need help?
General
