Fujitsu ETERNUS DX200 S3 Setup Guide

Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning
4.4 When Using Thin Provisioning Volumes (TPVs)
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
55
4.4.1 Set Thin Provisioning
This function enables the Thin Provisioning function.
The procedure to enable the Thin Provisioning function is as follows:
Procedure
1 Click [Set Thin Provisioning] in [Action].
 The [Thin Provisioning Settings] screen appears.
Note that the Thin Provisioning function is not provided for the ETERNUS DX100 S3 1CM model. In addition,
the "Thin Provisioning" navigation is not displayed for this model.

Fujitsu ETERNUS DX200 S3 Specifications

General

Model	ETERNUS DX200 S3
Category	Storage
Number of Controllers	2
Drive Types Supported	SAS, Nearline SAS
RAID Levels	0, 1, 5, 6
Power Supply	Redundant
Management Software	ETERNUS SF
Host Interfaces	Fibre Channel, iSCSI, SAS
Form Factor	Rack-mounted