Fujitsu ETERNUS DX200 S3 Setup Guide

Chapter 1 Outline
1.4 Operating Environment
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
16
- Set the following items for [Compatibility View Settings] under the Tools menu.
• If an address for the ETERNUS DX is displayed in the [Websites you've added to Compatibility View:]
field, select and then delete the address
• Clear the [Display intranet sites in Compatibility View] checkbox
• Clear the [Display all websites in Compatibility View] checkbox
- When using SSL (https), note the following points:
• On the Internet Options Advanced tab, scroll to Security, and select [Use SSL3.0] or [Use TLS1.0].
• On the Internet Options Advanced tab, scroll to Security, and clear the [Do not save encrypted pages
to disk] checkbox.

Fujitsu ETERNUS DX200 S3 Specifications

General

Model	ETERNUS DX200 S3
Category	Storage
Number of Controllers	2
Drive Types Supported	SAS, Nearline SAS
RAID Levels	0, 1, 5, 6
Power Supply	Redundant
Management Software	ETERNUS SF
Host Interfaces	Fibre Channel, iSCSI, SAS
Form Factor	Rack-mounted