Fujitsu ETERNUS DX200 S3 Setup Guide

Preface
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
5
• FUJITSU Storage ETERNUS SF KM V2.5 Administering
• FUJITSU Storage ETERNUS SF KM V2.5 Reference
• FUJITSU Storage ETERNUS SF KM V2.5 Glossary
• FUJITSU Storage ETERNUS SF KM V2.5 Installation and Configuration Guide
• FUJITSU Storage ETERNUS SF KM V2.5 Installation Guide (Windows)
• FUJITSU Storage ETERNUS SF KM V2.5 Installation Guide (Linux)
• FUJITSU Storage ETERNUS SF KM V2.5 Replication Environment Setup Guide (Windows)
• FUJITSU Storage ETERNUS SF KM V2.5 Replication Environment Setup Guide (Linux)
• FUJITSU Storage ETERNUS SF Storage Cruiser 16.1 Operation Guide
*1: Download the required manuals for your system environment.
The Structures and Contents of GUI Manuals
The GUI manual is composed of the following three manuals.
• FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
• ETERNUS Web GUI User's Guide (Settings)
• ETERNUS Web GUI User's Guide (Operation)
The following table describes the contents of each manual.
Manual name Contents
FUJITSU Storage ETERNUS DX
Configuration Guide (Web GUI)
This manual describes the installation and the environmental settings for the
ETERNUS DX storage systems. For basic settings that are not described in this
manual, refer to "FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Disk storage sys-
tem Configuration Guide (Basic)", "FUJITSU Storage ETERNUS DX500 S3/DX600 S3
Disk storage system Configuration Guide (Basic)", or the "FUJITSU Storage ETER-
NUS DX200F All Flash Array Configuration Guide (Basic)".
ETERNUS Web GUI User's Guide
(Settings)
This manual describes the procedures, setup parameters, input conditions, and
the default values for GUI. Refer to this manual for functions and advanced set-
tings that are not described in "FUJITSU Storage ETERNUS DX Configuration Guide
(Web GUI)".
ETERNUS Web GUI User's Guide
(Operation)
This manual describes the monitoring information of the system status for the
ETERNUS DX storage systems. This manual also describes how to check the
results of the GUI configuration.

Fujitsu ETERNUS DX200 S3 Specifications

General

Model	ETERNUS DX200 S3
Category	Storage
Number of Controllers	2
Drive Types Supported	SAS, Nearline SAS
RAID Levels	0, 1, 5, 6
Power Supply	Redundant
Management Software	ETERNUS SF
Host Interfaces	Fibre Channel, iSCSI, SAS
Form Factor	Rack-mounted