Fujitsu ETERNUS DX200 S3 Setup Guide

Chapter 4 Configuration Settings for RAID Groups or Thin Provisioning
4.4 When Using Thin Provisioning Volumes (TPVs)
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
64
3 Select "Thin Provisioning Volume" for the volume type and specify the volume detailed
information.
The main setting items are as follows.
● New Volume
• Name
• Capacity
• Type
● Automatic Setting
• Drive Type
• RAID Level
• Key Group
• Number of Volumes
4 Click the [Create] button.
 A confirmation screen appears.
5 Click the [OK] button.
 TPV creation starts.
6 Click the [Done] button to return to the [Volume] screen.
End of procedure

Fujitsu ETERNUS DX200 S3 Specifications

General

Model	ETERNUS DX200 S3
Category	Storage
Number of Controllers	2
Drive Types Supported	SAS, Nearline SAS
RAID Levels	0, 1, 5, 6
Power Supply	Redundant
Management Software	ETERNUS SF
Host Interfaces	Fibre Channel, iSCSI, SAS
Form Factor	Rack-mounted