Fujitsu ETERNUS DX200 S3 Setup Guide

Preface
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
8
Setting Procedures in This Manual
Detailed information about the setup parameters (descriptions and input conditions) in operating procedures
are described in "ETERNUS Web GUI User’s Guide (Settings)". Refer to "Appendix Parameter List" in "ETERNUS
Web GUI User’s Guide (Settings)" for details.
For detailed information about the display contents and how to check the results of the configuration, refer to
"ETERNUS Web GUI User’s Guide (Operation)".
Note that the screen shots in this manual were captured during development of the software and the actual
screens may be different.
Microsoft product screen shot(s) reprinted with permission from Microsoft Corporation.

Fujitsu ETERNUS DX200 S3 Specifications

General

Model	ETERNUS DX200 S3
Category	Storage
Number of Controllers	2
Drive Types Supported	SAS, Nearline SAS
RAID Levels	0, 1, 5, 6
Power Supply	Redundant
Management Software	ETERNUS SF
Host Interfaces	Fibre Channel, iSCSI, SAS
Form Factor	Rack-mounted