Fujitsu ETERNUS DX200 S3 Setup Guide

Chapter 5 Host Interface Management
5.5 Add Host Groups
FUJITSU Storage ETERNUS DX Configuration Guide (Web GUI)
Copyright 2014 FUJITSU LIMITED P2X0-1250-06ENZ0
91
The procedure to create an FC host group is as follows:
Procedure
1 Click [Add FC/FCoE Host Group] in [Action].
 The [Add FC/FCoE Host Group] screen appears.
2 Input a host group name to be created, and select a host response to be assigned to the
host group.
The main setting items are as follows.
● Host Group Setting
• Host Group Name
• Host Response

Fujitsu ETERNUS DX200 S3 Specifications

General

Model	ETERNUS DX200 S3
Category	Storage
Number of Controllers	2
Drive Types Supported	SAS, Nearline SAS
RAID Levels	0, 1, 5, 6
Power Supply	Redundant
Management Software	ETERNUS SF
Host Interfaces	Fibre Channel, iSCSI, SAS
Form Factor	Rack-mounted