Fujitsu ETERNUS DX60 S3 - Rear; Figure 3 Rear View of a Controller Enclosure (When Only One Controller Is Installed); Figure 4 Rear View of a Controller Enclosure (When Two Controllers Are Installed)

Rear
This section provides the names of the components on the rear of a controller enclosure.
■
When Only One Controller Is Installed
Figure 3 Rear View of a Controller Enclosure (When Only One Controller Is Installed)
1
2
34
1.
Controller (CM#0)
2. Cover
Remove this when installing an additional controller (optional).
3. Power supply unit (PSU#0)
4. Power supply unit (PSU#1)
■
When Two Controllers Are Installed
Figure 4 Rear View of a Controller Enclosure (When Two Controllers Are Installed)
1
2
34
1.
Controller (CM#0)
2. Controller (CM#1)
3. Power supply unit (PSU#0)
4. Power supply unit (PSU#1)
1. Component Names and LED Names
Controller Enclosures
10
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0