Fujitsu ETERNUS DX60 S3 - 2 Basic Operation; Powering on and off; Switching on and off the Main Line Switch on the Power Distribution Unit (for Regions Other than the EMEIA, Central American, and Caribbean Regions); Figure 30 on Position (Marked |) of the Main Line Switches on a 1 U Power Distribution Unit

2. Basic Operation
This chapter explains how to turn on and off the ETERNUS DX and how to operate the FUNCTION button on the
controller enclosure.
Powering On and Off
This section explains how to turn on and off the ETERNUS DX.
Switching On and Off the Main Line Switch on the Power Distribution Unit (for Re-
gions other than the EMEIA, Central American, and Caribbean Regions)
This section explains how to switch the main line switch of the power distribution unit to ON and OFF.
For power distribution units, there are two different types of exteriors.
■
To Switch to ON
Turn the main line switch of the power distribution unit to the ON position (marked "|").
Make sure all of the main line switches are in the ON position.
● For 1U
Figure 30 ON Position (Marked "|") of the Main Line Switches on a 1U Power Distribution Unit
Main line switch
Figure 31 ON Position of the Main Line Switches on a 1U Power Distribution Unit
Main line switch
32
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0