Fujitsu ETERNUS DX60 S3 - Figure 32 on Position (Marked |) of the Main Line Switches on a 2 U Power Distribution Unit; Figure 33 on Position of the Main Line Switches on a 2 U Power Distribution Unit

● For 2U
Figure 32 ON Position (Marked "|") of the Main Line Switches on a 2U Power Distribution Unit
Main line switch
Figure 33 ON Position of the Main Line Switches on a 2U Power Distribution Unit
Main line switch
■
To Switch to OFF
Turn the main line switch of the power distribution unit to the OFF position (marked "¡").
This does not need to be turned off for normal operation. If the ETERNUS DX must be turned off, such as be-
fore any inspections of power supply devices are performed, turn off the ETERNUS DX by using the procedure
described in "Powering Off" (page 39), turn all the PSU switches of the power supply unit to the OFF posi-
tion, and turn the main line switch to the OFF position.
2.
Basic Operation
Powering On and Off
33
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0