4. Component Expansion/Function Enhancement
For the ETERNUS DX, customers can expand (add) the following optional products.
•
Drives
•
Drive enclosures
This chapter explains the handling instructions and the installation procedures for these optional products.
Make sure to read "Safety Precautions" before performing any of these procedures.
When adding servers to be connected, refer to "Adding Servers" (page 69).
Installing Additional Drives
Drives can be installed while the ETERNUS DX is running without affecting the system.
This section explains how to install drives in the ETERNUS DX.
•
Do not uninstall or move a drive that is already installed.
Contact your sales representative or maintenance engineer if drives that are installed
by default need to be uninstalled or moved to another slot.
Installable Drives
For installable drives, refer to "Product List".
Drive Handling Instructions
■
About Condensation
•
When moving a drive from a cold place, such as an unconditioned store house in win-
ter, to a warmer place such as an air-conditioned room, the severe temperature
change may result in condensation forming.
To avoid this, allow the packed drive sufficient time in the warmer place (one hour for
each 15°C of temperature difference) to adapt to the new temperature.
47
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0
To Next Page
Loading...
