Fujitsu ETERNUS DX60 S3 - Power Distribution Units (2 U); Figure 27 Power Distribution Unit (AC200-240 V, 2 U, 12 Outlets); Figure 28 Power Distribution Unit (AC200-240 V, 2 U, 16 Outlets)

Power Distribution Units (2U)
2U power distribution units are available in two types: a 12 outlet type and a 16 outlet type.
■
Power Distribution Unit (AC200-240V, 2U, 12 Outlets)
There are 12 outlets.
Figure 27 Power Distribution Unit (AC200-240V, 2U, 12 Outlets)
2
1
1.
Main line switch
This turns on and off the power distribution unit.
2. Outlet (OUTPUT)
This is a socket (IEC60320 C13) for outgoing power supply. This socket is used to connect a power cord (AC out-
put cable).
■
Power Distribution Unit (AC200-240V, 2U, 16 Outlets)
For power distribution units (AC200-240V, 2U, 16 Outlets), there are two different types of exteriors.
There are 16 outlets.
Figure 28 Power Distribution Unit (AC200-240V, 2U, 16 Outlets)
2
1
1.
Main line switch
This turns on and off the power distribution unit.
1. Component Names and LED Names
Power Distribution Units (for Regions other than the EMEIA, Central American, and Caribbean Regions)
30
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0