■
LUN Group Addition
Add a group of volumes that can be recognized by the host (LUN group).
For each LUN group, volume numbers are assigned for the Logical Unit Numbers (LUNs) that are recognized by
the host.
The procedure to create a LUN group is as follows:
1 Click the [Connectivity] tab on the navigation of the ETERNUS Web GUI screen, and then click "LUN Group"
in [Category].
The [LUN Group] screen appears.
2 In [Action], click [Add LUN Group].
The [Add LUN Group] screen appears.
3 Enter the LUN group name in [LUN Group Setting], and then click the [Add] button in [Define LUN Group].
The [Add LUN] screen appears.
4 Enter the number for the first LUN and number of LUNs to allocate to the LUN group in [LUN Setting], se-
lect the number for the first volume to be allocated, and click the [OK] button.
The LUNs that are to be registered in the LUN group and the information for the volumes that are allocated
to the LUNs are displayed.
5 Click the [Create] button.
A confirmation screen appears.
6 Click the [OK] button.
The LUN group is added and the setting completion screen appears.
7 Click the [Done] button.
The screen returns to the [LUN Group] screen.
4.
Component Expansion/Function Enhancement
Adding Servers
73
FUJITSU Storage ETERNUS DX60 S4, ETERNUS DX60 S3 Hybrid Storage Systems Operation Guide (Basic)
Copyright 2018 FUJITSU LIMITED
P3AM-9012-08ENZ0
To Next Page
Loading...
