Fujitsu ETERNUS LT20 S2 - Installing the Library in a Rack

ETERNUS LT20 S2 23
Installing the Tape Library Rack Mounting the Tape Library
3.5.2 Installing the Library in a Rack
Different Rackmount Kits
Note that there are 3 different rackmount rails:
Figure 10: 3 different rackmount rails
1. PRIMECENTER rackmount rail for ETERNUS LT20 / LT40 / LT60 S2
A Torx screwdriver is requested. A counternut is entered in the 2. hole in the
rack of ETERNUS LT20 or in the 4. hole in the rack of ETERNUS LT40/60.
2. Standard rackmount rail for ETERNUS LT20 S2
The counternuts are already integrated, the screws are fixed with the help of
a Phillips screwdriver.
3. Standard rackmount rail for ETERNUS LT40 / LT60 S2
The counternuts are already integrated, the screws are fixed with the help of
a Phillips screwdriver in the 4. hole.
The library easily installs into a standard 19" rack system taking up 1U of space.
1
2
3