EasyManua.ls Logo

Fujitsu ETERNUS LT20 S2 - Veeam Operation Notes; Veeam Cleaning Tape Drives; Veeam Data Cartridge Labeling; Veeam Auto-Cleaning Conflict

Fujitsu ETERNUS LT20 S2
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
66 ETERNUS LT20 S2
Remote Management Unit (RMU) Operating the LTO Library
After certificate installation a parameter must be modified in Internet Explorer to
prevent the request for the certificate always appearing:
In Internet Options Extended, uncheck the box for showing warnings if the
certificate address does not match and
c
lick OK.
Figure 50: Unchecking the warnings box
4.4.6.4 Changing the SNMP Configuration
This page shows the current SNMP configuration of the library and allows
modification to the configuration. When a change is requested, a pop-up box will
ask to confirm the changes. You can reach this page by selecting Configuration
SNMP.
A list of changes that can be made are:
SNMP Enabled
IPv4 / IPv6 SNMP Target Addresses
IPv4 / IPv6 Target 1

Table of Contents

Other manuals for Fujitsu ETERNUS LT20 S2

Related product manuals