76 ETERNUS LT20 S2
Remote Management Unit (RMU) Operating the LTO Library
4.4.8.4 Rebooting the Library
V CAUTION
Some options of the RMU take the library offline. This inactive mode can
interfere with host-based application software, causing data loss. Ensure
that the library is idle before attempting to perform any remote operations
that will take the library offline.
This page is used to perform a library reboot. During a reboot, the connection
to the library is lost and the RMU display in your browser may be affected. In this
case you will have to reload the RMU page in your browser manually. You can
reach this page by selecting Service → Reboot.
Figure 63: Service, Reboot page
To Next Page
Loading...
