ETERNUS LT20 S2 69
Operating the LTO Library Remote Management Unit (RMU)
Figure 53: Configuration, Date/Time page
4.4.6.7 Setting Error Log Mode
This page allows administration personal stop the error log or to set the error log
mode to Continuous or to Stop Trace At First Error. You can reach this page by
selecting Configuration → Log.
I All available options are supported only if you have logged in as "Service"
user (see figure and description in section “Login” on page 52).
Figure 54: Configuration, Log page
I The trace level and trace filter selection options can be set by service
personnel.
4.4.6.8 Setting Event Notification Parameters
This page allows the user to set event notification to On. You can reach this
page by selecting Configuration → Event Notification.
Choices for event notification are:
To Next Page
Loading...
