ETERNUS LT20 S2 33
Installing the Tape Library Connecting
3.6.3 Verifying the Detection of the Library Under
Windows
● When the host server is switched on, install the software and/or the drivers
compatible with the library. Backup software packages may require
additional software or licensing to communicate with the library.
● After connecting the library, confirm the host server's operating system
recognized the library in Microsoft® Windows® XP, Windows® Server 2003
or in Windows 2008® by going to: Settings → Control Panel → System →
Hardware → Device Manager → Tape Drive and/or Media Changer.
For more information on verifying the connection of devices, consult the
operating system documentation.
To Next Page
Loading...
