First-time setup of your d evice
First-time setup of your devic
e
First- time setu pGettingstarted
Please read the chapter "Important notes", Page 12.
If your device is equipped with a Windows operating system, the necessary
hardware drivers and supplied software are already pre-installed.
Beforeyouswitchonthedeviceforthefirst time, connect it to the mains voltage
using the mains adapter, see "
Mains adapter connecting", Page 16.Themains
adapter must be connected during the entire installation process.
A system test is performed when your device is first switched on. Various messages
can appear. The display m ay remain dark for a short time or may flicker.
Please follow the instructions on the screen.
NEVER switch off your device during the first-time se tup pr ocess.
On delivery, the battery can be found in the battery compartment or in the accessories kit.
The battery must be charged if you want to operate your device using the battery.
When used on the move, the built-in battery pro vides the device with the necessary power. You
can increase the operating time by using the available energy-saving functions.
For instructions on h ow to connect external devices (e.g. mouse, printer) to your
device, please refer to the operating ma nual for your device.
Unpacking and checking the d
evice
Should you discover any damage that occurred during transportation,
notify your local sales outlet immediately!
► Unpack all the individual parts.
PackagingTransport
► Check y our device for any visible damage which may have occurred during tra nsportation.
You may need the packaging in the future, if you need to tra nsport your device.
Fujitsu Technology Solutions 15
To Next Page
Loading...
