Connecting external devices
Connecting an external SATA hard disk (eSATA)
An external SATA hard disk can be connected at the eSATA port. This allows you
to expand the internal hard disk capacity as y ou wish.
The length of the eSATA cable must not exceed 2 me tres. Consult a specialist
dealer for advice on which eSATA data cable is suitable for your external eSATA
hard disk. Make sure that the hard disk has its own external power supply.
The data transfer rate is up to 2,400 Mbit/s.
eSATA
► Connect the data cable to the e xternal
device.
► Connect the data cable to the eSATA po rt.
Device driverThe eSATA hard disk is automatically recognised by
your operating system and installed.
You will find more information in the documentation fo r the external SATA
hard disk and the operating system.
Safe removal of eSATA and USB devices
Always correctly
remove the device according to the rules described below,
to ensure that non
e of your data is lost.
► Left-click on the symbol to remove hardware safely.
► Select the device which you want to shut down and remove.
► Press the "Enter" key.
Wait for the dialogue box which tells you that it is now safe to remove the device.
68 Fujitsu Technology S olutions
To Next Page
Loading...
