Connecting external devices
Connecting external devices
Always refer to the safety information provided in "Important notes", Page 12 before
connecting or disconnecting any devices to or from your notebook.
Always read the documentation supplied with the device you wish to connect.
Never connect or disconnect cables during a thu nderstorm.
Never pu ll at a cable when disconnecting it. Always grasp the plug.
Follow the steps below in order, when con nect ing or disconnecting
devices to your notebook:
With some devices such as USB devices, it is not necessary to switch off
the notebook and the device before connecting/disconnecting. For more
information about whether or not devices need to be switched off, please refer
to the documentation supplied with the extern al de vice.
Some of th e external devices require special drivers (see the operating
system and external device documentation).
Connecting devices to the noteboo k
1. Turn off your notebook and all external devices.
2. Unplug your notebook and al
l devices from the mains sockets.
3. Connect the cables for your external devices following the instructions.
4. Plug all power cables into t
he mains sockets.
DevicesPer ipheralde
vices
Disconnecting devic es from the notebook
1. Turn off your notebook and all external devices.
2. Unplug your notebook and all dev
ices from the mains sockets.
3. Disconnect the cables for your external devices following the instructions.
DevicesPer ipheraldev ices
64 Fujitsu Technology S olutions
To Next Page
Loading...
