Working with the notebook
Connecting the notebook to the Port Replicator
If you connect the notebook to the Port Replicator during operation, problems can
occur. We recommend that you switch off the notebook beforehand.
The mains adapter must be connected to the Port Replicator when the
notebook is connected to the Port Replicator.
We recommend that the notebook is not operated with the LCD monitor closed when
the notebook is connected to the Port Replicator. The resulting overheating can
cause redu ced performance and increased activity of t he integrated fan.
PortReplic ato r
► Switch the notebook off.
► Remove the power plug of the mai
ns adapter from the mains socket.
► Disconnect the mains adapter cable from the DC socket (DC IN) of the n otebook.
a
2
1
► Ensu re that the positioning aid (a) is folded (1).
► Position the notebook so that it is in line with the back edge an d the
positioning aid of the Port Replicator.
► Push the centre of the notebook in the direction of the arrow (2) onto the
Port Replicator until it is felt t o engage .
Fujitsu Technology Solutions 51
To Next Page
Loading...
