Security functions
SmartCard as software protection (SmartCase
™
Logon+)
Together with a CardOS SmartCard, softwa re like SmartCase
™
Logon+ gives you the
option of logging on with the SmartCard and entering your PIN. If th e PIN is entered
correctly, SmartCard is checked and the operating system is booted. T he SmartCard must
remain in the SmartCard reader during the entire work session.
In addition, the soft ware allows you to block your computer during breaks. This allows
you to leave your notebook unattended, without the risk of unauthorised persons
being able to access your opened documen ts and data.
The settings for blocking access to the computer during a session are set up in
SmartCase
™
Logon+ under OS Logon (Smarty). Among other things, Smarty allows
you to specify how users should log on to the operating system, e.g.:
• Fingerprint (without a SmartCard)
• TPM with PIN (without a SmartCard)
• Windows password
• SmartCard with PIN, with fingerprint or with PIN and fingerprint
To install, configure and use SmartC ase
™
Logon+, please r efer to the documentation
and online help on the CD with the SmartCase
™
Logon+ software.
Proceed as follows to block your computer when you want to take a break:
► Pull the SmartCard out of the notebook during your work session.
A window appears stating tha
t t he system is locked.
► W hen you want to continue with your wo rk, insert the SmartCard and enter your PIN .
You will automatically retur
n to your opened documents.
Fujitsu Technology Solutions 61
To Next Page
Loading...
