Working with the notebook
SIM card
A SIM C ard (Subscriber Identity Module) is a chip card w hich is inserte d in a mobile telephone or
notebook to en able access to a mobile radio network in conjunction with an installed UMTS module.
Follow the instructions supplied by the provid er of the SIM card.
The SIM card slot is located in the battery compartment and can only
be accessed when the battery is removed.
Inserting the SIM card
► Prepare for insertion of the SI M card, see chapter "Pr eparing to remove components", Page 72.
1
2
a
► Slide the SIM card into the slot (1)
until it is felt to engage, as shown in
the battery comp artment.
► Slide the SIM card lock ( a) in the
direction of the arrow (2).
► Complete the installa
tion, see chapter "
Finishing component removal", Page 77.
Removing a SIM card
► Prepare for removal of the SIM card, see chapter "Preparing to remove components", Pag e 72.
a
1
2
► Slide the SIM card lock ( a) in the
direction of the arrow (1).
► Press on the edge of the SIM card so that
it jumps up s lightly out of the s lot.
► Pull the SIM card out of the slot in the
direction of the arrow (2).
► Complete the rem
oval, see chapter "
Finishing component removal", Page 77.
Fujitsu Technology Solutions 47
To Next Page
Loading...
