First-time setup of your d evice
Switching on the device for the first time
Switchingonforthefirst time
On devices with ON /OFF switch for wireless components: Slide the ON/OFF switch
for wireless comp onents to the ON position before switching on the device.
When you switch on the device for the first time, the supplied software i s
installed and configured. Because this procedure must not be interrupted,
you should se t aside enough time fo r it to be fully completed and connect
the device to the mains using the mains adapter.
During the installation process, DO NOT restart the device unless
you are requested to do so!
To make it easier to use your de
vice for the first tim e, th e operating syste m
is pre-installed on the hard
disk.
► Switch on your device.
► During installation, follow the instructions on screen.
If a Windows operating system is installed on y our device, you will find more
information on the system and drivers, help programmes, updates, manuals etc.
on the device or on the Internet at "
http://ts.fuji tsu.com/support".
Fujitsu Technology Solutions 17
To Next Page
Loading...
