Working w ith the notebook
Manual removal (emergency removal)
CD/DVD:ManualremovalofdatacarrierEmergency r emovalof datacarrier
In the event of a power failure or damage to the d rive, you can remove the data carrier manually.
1
2
► Switch your notebook off.
► Push a pen o r a piece of wire (such as a
paperclip) firmly into the opening (1).
The drive tray is ejected. You can now pull
the drive tray (2) out of the drive.
Removing and fitting the dust removal cover
(ventilation slot cover)
The description below app lies to both vent covers.
In order to ensure optimum cooling of the components in your notebook, you
should periodically clean the ventilation slot of the heatsink.
This ensures optimum f
an performance. You can achieve the best cleaning
results with a small ha
nd-held vacuum cleaner.
If necessary, you can also use a dry brush to release dust from the ventilation slots.
Do not use a ny cleaning
liquids! Ensure that no liquid enters the device.
To avoid overheating of the device, do not remove the ventilation slot
cover when the device is switched on .
► Prepare for removal, see chapter "
Prep aring t o remove components", Page 72.
38 Fujitsu Technology S olutions
To Next Page
Loading...
