Working w ith the notebook
Installing a m odule
► Place the module into the module bay so that the contacts enter first.
► Push the module into the module bay unt il you feel it locking into place.
Optical drive
Opticaldrive
This product contains a light emitting diode, classi fied in accordance with IEC
8251:1993: LASER CLASS 1, and must therefore not be opened .
Handling data c arriers
Handling
Observe the following guidelines when handling data carriers:
• Avoid touching the surface of a data carrier. Only handle data carriers by their edges.
• Always store data carriers in their cases. This will protect the data carrier against
being covered in dust, scratched or damaged in any other wa y.
• Protect your data carriers against dust, mechanical vibrations and direct sunlight.
• Avoid storing a data carrier in areas subject to high temperatures or humidity.
You may use both 8-cm and 12-cm data carriers in the opt ical drive.
When using a data carrier of lesser quality, vibrations and reading errors may occur.
36 Fujitsu Technology S olutions
To Next Page
Loading...
