Fujitsu Primergy RX300 S2 Options Guide

RX300 S2 Options Guide 25
5Main memory
V CAUTION!
Observe the safety instructions in the chapter „Safety notes“ on page 15.
The system board supports up to 16 Gbytes of main memory. 8 slots (4 memory
banks with 2 slots each) are provided for the main memory. Each memory bank
is equipped with two 512-Mbyte, 1-Gbyte or 2-Gbyte registered DDR2 400
(PC2-3200) memory modules.
A memory bank can optionally be configured as a hot-spare bank.
As memory bank 3 is already equipped either with 1-Gbyte, 2-Gbyte or
4-Gbyte of memory in the basic unit, up to 3 memory upgrades can be fitted,
one to each banks 2, 1 and 0.
ECC with memory scrubbing and with the Single Device Data Correction
(SDDC, Chipkill) function is standard.

Fujitsu Primergy RX300 S2 Specifications

General

Processor Sockets	2
Chipset	Intel 5000P
Network	2 x Gigabit Ethernet
Form Factor	2U Rackmount
Processor	Intel Xeon 5000/5100/5300 series
Storage	SAS or SATA HDD 2.5"/3.5"
RAID Support	Optional RAID controller
Operating System Support	Windows Server, Linux
Power Supply	Redundant power supply optional