RX300 S2 Options Guide 21
4 Preparation
V CAUTION!
Observe the safety instructions in the chapter „Safety notes“ on page 15.
4.1 Removing the server form the rack
Ê Terminate all applications and shut down the server correctly.
Ê If your operating system has not switched off the sever, press the on/off
switch.
Ê Pull all power connectors out of the power outlets.
Figure 2: Loosening the knurled screws
Ê Loosen the four knurled screws (1) and pull the server as far as possible out
of the rack (2).
2
1
1
To Next Page
Loading...
