Fujitsu Primergy RX300 S2 Options Guide

76 Options Guide RX300 S2
Installing the external SCSI interface External SCSI interface
Removing the cache module
If a ROMB upgrade kit is incorporated in the server, remove the cache module.
Figure 51: Removing the cache module
Ê Press the holders on either side of the mounting location outward.
Ê Pull the cache module out of its location.
V CAUTION!
Do not pull on the battery (BBU) when removing the cache module.
Always hold the cache module by their edges.

Fujitsu Primergy RX300 S2 Specifications

General

Processor Sockets	2
Chipset	Intel 5000P
Network	2 x Gigabit Ethernet
Form Factor	2U Rackmount
Processor	Intel Xeon 5000/5100/5300 series
Storage	SAS or SATA HDD 2.5"/3.5"
RAID Support	Optional RAID controller
Operating System Support	Windows Server, Linux
Power Supply	Redundant power supply optional