Fujitsu Primergy RX300 S2 Options Guide

8 Options Guide RX300 S2
Overview of the documentation Introduction
Additional documentation about the server
The PRIMERGY TX300 S2 documentation comprises the following additional
manuals:
– The “Safety notes and other important information” manual (printed copy
always supplied with the server, and available as a PDF file on the
ServerBooks DVD supplied)
– The “Warranty” manual (printed copy always supplied with the server, and
available as a PDF file on the ServerBooks DVD supplied)
– The Operating Manual for PRIMERGY RX300 S2 (PDF available on the
ServerBooks DVD supplied)
– The Technical Manual for the system board D1889/D2089 (PDF available on
the ServerBooks DVD supplied)
– The “BIOS Setup” manual (PDF available on the ServerBooks DVD supplied)
– The “PRIMERGY ServerView Suite - ServerStart” manual (printed copy
always supplied with the server, and available as PDF file on the ServerBooks
DVD supplied)
I You can order a supplementary ServerBooks DVD by sending an e-mail to
the following address, quoting your server data:
Reklamat-PC-LOG@fujitsu-siemens.com
Further sources of information:
– Technical Manual on the relevant rack
– Manual on the monitor
– Manual on ServerView Server Management
– Manual on the RemoteView Remote Test and Diagnostics System
– Manual on LocalView
– Documentation on boards and drives
– Documentation on your operating system
– Information files on your operating system
(see also chapter „Related publications“ on page 117)

Fujitsu Primergy RX300 S2 Specifications

General

Processor Sockets	2
Chipset	Intel 5000P
Network	2 x Gigabit Ethernet
Form Factor	2U Rackmount
Processor	Intel Xeon 5000/5100/5300 series
Storage	SAS or SATA HDD 2.5"/3.5"
RAID Support	Optional RAID controller
Operating System Support	Windows Server, Linux
Power Supply	Redundant power supply optional