Introducing the Encore/Eclipse Series Understanding Date Codes and Serial Numbers
Page 14 MDE-3893P Encore® and Eclipse® Series Owner’s Manual · December 2011
To determine the model code on a Gilbarco Encore 300, 500 and 550, or Encore S Series unit,
refer to the following table.
Note: Not all models are available in an Encore 300 (E300), Encore 500/550 (E500/E550), or
Encore S Series version.
Encore 300, 500/550, and Encore S Series
N X X
Encore A = Multi-hose
Dispenser
0 = 1 Grade
1 = 2 Grade
2 = 3 Grade
3 = 4 Grade
4 = DEF only
C = Multi-hose Pump 0 = 1 Grade
1 = 2 Grade
2 = 3 Grade
3 = 4 Grade
G = Single-hose 0 = 3 Grade Dispenser
1 = 3 Grade + 1 Dispenser
2 = 3 Grade Pump
3 = 3 Grade Pump + 1
4 = 2 Grade Single-hose MPD
5 = 2 Grade Single-hose Pump
J = Multi-hose Blender 0 = 3 Grade Blender Dispenser
1 = 3 Grade Blender Pump
2 = 4 Grade Blender + 1 Dispenser
3 = 4 Grade Blender + 1 Pump
4 = 3 + 2 Grade Blender Dispenser
L = X+1 Blender 0 = 2 + 1 Grade Blender Dispenser
1 = 3 + 1 Grade Blender Dispenser
2 = 4 + 1 Grade Blender Dispenser
3 = 3 + 1 + 1 Grade Blender Dispenser
4 = 2 + 1 Grade Blender Pump
5 = 3 + 1 Grade Blender Pump
6 = 4 + 1 Grade Blender Pump
N = X+0 Blender 1 = 3 + 0 Grade Blender Dispenser
2 = 4 + 0 Grade Blender Dispenser
3 = 5 + 0 Grade Blender Dispenser
5 = 3 + 0 Grade Blender Pump
6 = 4 + 0 Grade Blender Pump
7 = 5 + 0 Grade Blender Pump
P = Ultra High Flow 3 = Ultra-Hi
™
Master
4 = Ultra-Hi Combo
5 = Ultra-Hi Satellite
6 = Ultra-Hi Master Dispenser - Single-sided Dual Product Unit
8 = Ultra-Hi Satellite Dispenser - Single-sided Dual Product Unit
A = Ultra-Hi Master + DEF
B = Ultra-Hi Combo + DEF
R = Special 0 = No Hydraulics
1 = Robot
2 = Simulator
3 = Pumpless Pump
4 = No Electronics
To Next Page
Loading...
Need help?
General