MDE-3893P Encore® and Eclipse® Series Owner’s Manual · December 2011 Page 15
Common Functions Introducing the Encore/Eclipse Series
Examples:
1 A serial plate stamped “CJ-NA0” contains the following information:
• Date code [CJ]—This unit was manufactured in March 2000.
• Model code [NA0]—This unit is a single-grade, multi-hose, Encore dispenser.
2 A UL Weights and Measures label that lists “CP-NA0” contains the following information:
• Date code [CP]—This unit was manufactured in March 2005.
• Model code [NA0]—This unit is a single-grade, multi-hose, Encore S dispenser.
To determine the model code on a Gilbarco Eclipse unit, refer to the following table. Note that
not all models are available in an Eclipse unit.
Eclipse Units
E X X
Eclipse G = Single-hose MPD 0 = 3 Grade
L = X + 1 Blender, 4 Hose 0 = 2 + 1 Grade Blender Dispenser
1 = 3 + 1 Grade Blender Dispenser
2 = 4 + 1 Grade Blender Dispenser
3 = 5 + 1 Grade Blender Dispenser
N = X + 0 Blender, 2 Hose 0 = 2 + 0 Grade Blender Dispenser
1 = 3 + 0 Grade Blender Dispenser
2 = 4 + 0 Grade Blender Dispenser
3 = 5 + 0 Grade Blender Dispenser
Example:
A serial plate stamped “GM-EN1” contains the following information:
• Date code [GM]—This unit was manufactured in July 2003.
• Model code [EN1]—This unit is a three-grade, two-hose, Eclipse blender dispenser.
Common Functions
This section provides information on the common functions of the Encore Series and Eclipse
units.
Displaying the Last Transaction
If power supply is interrupted, information about the previous sale (last transaction) remains
visible on the main display for at least 15 minutes.
To Next Page
Loading...
Need help?
General