Fujitsu ScanSnap S1100 - Page 295

Actions (for Mac OS users)
295
Without using the Quick Menu
1. Select [Settings] from the ScanSnap Manager menu.
For details about the ScanSnap Manager menu, refer to
"ScanSnap Manager Menu"
(page 224)
.
 The ScanSnap setup window appears.
2. In the [Application] pop-up menu in the [Application] tab, select
[Cardiris].
To disable the Quick Menu, you need to clear the [Use Quick Menu] checkbox in the ScanSnap
setup window.
For details about how to perform scanning without using the Quick Menu, refer to
"Without Using
the Quick Menu" (page 233)
.
It is recommended that you select [Automatic resolution] or [Best] for [Image quality] in the
[Scanning] tab of the ScanSnap setup window.
ScanSnap Manager can also link with [Cardiris] when you select:
z [Cardiris] from the [Profile] pop-up menu of the ScanSnap setup window
z [Cardiris] from the Profile menu