Installing in Windows
46
■ Trial Software
Install the trial versions of the software in the following procedure.
1. Turn on the computer and log on as a user with Administrator privileges.
2. Insert the Setup DVD-ROM into the DVD-ROM drive.
The [ScanSnap Setup] dialog box appears.
3. Click the [Trial Software] button.
The [Trial Software] dialog box appears.
For details about system requirements and installation, refer to "Readme" of the trial version
software. Click on the name of the software in the [Trial Software] dialog box, then click the
[Readme] button to open the Readme file.
If the [ScanSnap Setup] dialog box does not appear, double-click "ScanSnap.exe" in the
Setup DVD-ROM via Windows Explorer.
To Next Page
Loading...
