Without Using the Quick MenuUsing the Quick Menu
The selected application starts up.
Select a profile
Turn on the ScanSnap.(
page 25)
1. Load a document in the ScanSnap.
You can only load one document at a time.
z Documents for scanning (
page 27)
z How to load documents ( page 30)
2. Press the [Scan/Stop] button to start scanning.
3. To continue scanning, load the next document
after confirming that the current document has
been ejected. Scanning starts automatically when
the next document is loaded.
The [Scan/Stop] button flashes in blue throughout
the scan.
4. Press the [Scan/Stop] button to finish scanning
when scanning is completed.
Select an application from the Quick Menu
To Next Page
Loading...
