How to Perform a Scan (for Windows users)
71
5. Press the [Scan/Stop] button on the ScanSnap to start scanning.
The [ScanSnap Manager - Image scanning and file saving] dialog box appears.
The [ScanSnap Manager - Image scanning and file saving] dialog box then shows a
new message indicating that the ScanSnap is ready for the next scan.
You can also start scanning from the Right-Click Menu.
For more details, refer to "Right-Click Menu" (page 59).
z Do not connect and disconnect the ScanSnap and other USB devices during scanning.
z Do not close the feed guide during scanning.
z Do not switch users during scanning. Doing so will cancel scanning.
Load another document in the ScanSnap when you want to scan multiple sheets. Scanning
starts automatically when a document is loaded.
To Next Page
Loading...
