● For screens that use HDMI and support touch capabilities, a USB cable is used to transmit
touch events from the screen to the robot, connect this cable to a USB-A port on your robot.
● Connect the screen to an appropriate power source and switch on the screen using the
appropriate control/power button on the screen.
● Switch on your robot. The robot will detect the attached screen and present the
Web-Console login page on the screen.
● On screens with touch capabilities, you can login using the virtual keyboard function.
Touching and holding down the password field on the screen will bring up the virtual
keyboard. Enter the appropriate password (default = admin) using the virtual keyboard and
select the continue icon to log in to the Web-Console landing on the Home Tab.
Copyright Furhat Robotics AB © 2020 - Commercial In Confidence
To Next Page
Loading...