the robot. Whereas if the robot is using the monitor to display information, the screen is best
placed closer to the robot.
Physical Security Considerations
The physical deployment of the robot should pay attention to securing access to the rear I/O
panel of the robot where multiple physical I/O ports are present. The robot’s rotary controller is
also accessible at the rear of the robot and this controller can be used to effect changes to the
robot's configuration and settings.
Your robot can be physically secured to any appropriate mounting surface using the hole in the
bottom side of the robot.
Copyright Furhat Robotics AB © 2020 - Commercial In Confidence
To Next Page
Loading...