Caring For Your Robot
Your robot is designed in order to give you years of reliable service if cared for appropriately.
Environmental
The robot is designed for deployment in indoor office/business premises environments.
● Ambient temperature range 5-25° C / 41-77° F
● Low humidity, vibration, and dust levels.
● Ventilation clearance of 200mm behind the robot unit
Operations & Handling
The robot is designed to be operated like any other commercial electronics product.
● Exercise care when using the electrical, audio, and data ports on the robot
● Use controls such as the rotary controller and on/off switch with care in order to maximise
their service lifetime
● Avoid mechanical shocks and vibrations in the robot’s environment. The robot contains
sensitive and finely calibrated optics which may be damaged or misaligned by shocks
● Avoid manual adjustments and playing with the neck as this can damage or cause
misalignment of the robot motion platform and mechanics.
● Avoid removing power from your robot while it is running. Shut down your robot using the
on/off switch and only then remove power from the robot.
● We recommend that you keep your robot up to date with the latest releases of FurhatOS
using the software update function within the Web-Console
Your robot is designed to operate reliably in a continuous, sustained manner, however:
● In order to maximise the lifetime and performance of the robot, in particular it's projection
and optics systems, we recommend that you switch off the robot when it is not in use.
Copyright Furhat Robotics AB © 2020 - Commercial In Confidence
To Next Page
Loading...