Cleaning & Periodic Maintenance
The following cleaning and care tasks should be performed on a periodic basis
● Rub down / dust the robot using using a clean lint free cloth
● Check that there is adequate ventilation clearance behind and around the robot unit
● Inspect the rear ventilation grill and ensure it is free of obstruction and/or dust/lint
● Check that power, audio and data cables are in good condition and securely connected
Transportation
Your robot contains sensitive finely calibrated optics, projection, and mechanical components
which can be damaged due to shocks and or incorrect handling during transportation.
● The protective case in which your robot came is the ideal transportation device for your
robot. It is designed and built to offer maximum protection to your robot while it is being
transported.
● When flying with your robot it is recommended to check-in your robot as special baggage
and add fragile labels (where available) to the casing. Your robot does not contain batteries
or other components requiring special handling by airlines or airports.
Copyright Furhat Robotics AB © 2020 - Commercial In Confidence
To Next Page
Loading...